Anecto Ltd Peel Testing

Medical Devices

Peel Testing

For all your Laboratory Testing service requirements in any of the following areas contact Anecto Ltd:-
Reliability Testing, Qualmark, HALT, Life testing, HASS, stress screening, ISTA Testing, ASTM Testing, IEC Testing, MIL-STD Testing, British Standards Testing (BS), Drop Testing, Vibration Testing (Random and Sine), Temperature Humidity Testing, Temperature Cycling, Damp Heat, Ramp Rate, Contract Manufacturing, Bubble Leak testing, Peel Testing, Dye Penetration Testing, Peel Testing, Tensile Testing, Environmental testing, Product Evaluation, Product Validation, Thermal Shock, Process Validation, Integrity Testing, IPX Testing, Ingress testing, Transportation testing, Incline Testing, Package Testing, Fault Diagnosis, Fault Analysis, Distribution service, Test development, Design Verification Testing (DVT), Cold chain testing, Aerospace, Laboratory Testing Services, Medical Device testing, Accelerated Aging, Real time aging, shelf life, Accelerated Ageing, Real time ageing, Process equipment validation, Life Science, ISO9000, ISO17025, ISO11607, Accreditation, Automotive, Engineering, Turn Key, Process Qualification, Dangerous Goods Package, Hazardous Material package testing (HMR), HazMat package testing, Dangerous goods regulations, UN regulations, UN package testing, Hydrostatic Pressure Test, leekproofness testing, Mechanical testing, Material testing, Product testing, Performance Qualification, Leak tester, fastness testers, package testing, leak detection system for blister packs, package test system, torque testers, Installation Qualification (IQ), Operational Qualification (OQ) and Performance Qualification (PQ) Performance Verification (PV)

All our equipment (Qualmark, Thermotron, Votsch, Lansmont, Derritron, Zwick) are fully calibrated and traceable to national or international standards
For further information on any of our services please contact us at sales@anecto.com or telephone +353 (0)91 757404

Medical Devices

Peel Testing

SERVICES

Environmental Testing
Package and Transportation Testing
Medical Device Testing
HALT HASS Testing
Product Validation and Qualification
Dangerous Goods Package Testing
Failure Analysis and Repair
Test Development

INDUSTRIES

Automotive
Medical - Life Science
Electronic
Engineering

CONTACT US BY EMAIL

Anecto Ltd.,
Mervue Business Park,
Galway,
Ireland.

Phone (+353) 91 757404
Fax: (+353) 91 757387

Email sales@anecto.com

The seal peel tensile test determines the strength of the seal at a specific place on the package which can be helpful in setting the sealing parameters. This test involves measuring a segment of the package along one of the seals and cutting the package so that there is at least three inches (76mm)of material on each side of the heat seal. This sample is then inserted into the grips of a tensile test instrument with the heat seal centered between the two grips and the instrument initiated. The results are reported as max. force, mean and standard deviation.
This test method covers the seal peel test as defined in ASTM F88.

For further information on any of our services please contact us

For all your Laboratory Testing service requirements in any of the following areas contact Anecto Ltd:-
Reliability Testing, Qualmark, HALT, Life testing, HASS, stress screening, ISTA Testing, ASTM Testing, IEC Testing, MIL-STD Testing, British Standards Testing (BS), Drop Testing, Vibration Testing (Random and Sine), Temperature Humidity Testing, Temperature Cycling, Damp Heat, Ramp Rate, Contract Manufacturing, Bubble Leak testing, Peel Testing, Dye Penetration Testing, Peel Testing, Tensile Testing, Environmental testing, Product Evaluation, Product Validation, Thermal Shock, Process Validation, Integrity Testing, IPX Testing, Ingress testing, Transportation testing, Incline Testing, Package Testing, Fault Diagnosis, Fault Analysis, Distribution service, Test development, Design Verification Testing (DVT), Cold chain testing, Aerospace, Laboratory Testing Services, Medical Device testing, Accelerated Aging, Real time aging, shelf life, Accelerated Ageing, Real time ageing, Process equipment validation, Life Science, ISO9000, ISO17025, ISO11607, Accreditation, Automotive, Engineering, Turn Key, Process Qualification, Dangerous Goods Package, Hazardous Material package testing (HMR), HazMat package testing, Dangerous goods regulations, UN regulations, UN package testing, Hydrostatic Pressure Test, leekproofness testing, Mechanical testing, Material testing, Product testing, Performance Qualification, Leak tester, fastness testers, package testing, leak detection system for blister packs, package test system, torque testers, Installation Qualification (IQ), Operational Qualification (OQ) and Performance Qualification (PQ) Performance Verification (PV)

All our equipment (Qualmark, Thermotron, Votsch, Lansmont, Derritron, Zwick) are fully calibrated and traceable to national or international standards
For further information on any of our services please contact us at sales@anecto.com or telephone +353 (0)91 757404